Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to disassemble Volkswagen Polo airbag and steering wheel

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK V, MK 5, Polo V, Polo 5, 6R - Years 2009-2017
Part: Airbags
Operation: How to disassemble Volkswagen Polo airbag and steering wheel

In this video tutorial we will see how to disassemble and replace the Volkswagen Polo airbag and steering wheel in simple and quick steps. First of all, we get on board the car and start removing the plastic steering wheel cover; then let's press and release our airbag from the rear, inserting a flat screwdriver inside the holes, as shown in the video. At this point we disconnect the electrical connector to remove the steering wheel airbag; finally unscrew the central screw to remove the entire steering wheel, applying the reverse procedure for reassembly!


Posted on 10 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - What kind of error can the airbag of the Volkswagen Polo give? Read Answer
    • Polo 2009-2017 - When does the airbag light turn on in the Volkswagen Polo? Read Answer
    • Polo 2001-2009 - Where is the Volkswagen Polo 9N airbag control unit located? Read Answer
    • Polo 2017-2025 - What to do if the airbag light comes on in the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - What does the "Airbag" light on a Volkswagen Polo mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos