Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Oil filter

The oil filter is located just above the oil sump: to perform this maintenance, it is advisable to lift the vehicle on a hydraulic lift to access the undercarriage; usually, it is preferred to first drain the used oil through the drain plug located under the sump before proceeding to replace the filter; to remove the filter, you can use a socket wrench or a metal strap wrench: once the old filter is removed, coat the gasket of the new filter with clean oil and screw it into place without exceeding the tightening torque; finally, fill the engine with new oil until reaching the maximum level.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Oil Filter and Oil on Volkswagen Passat
How to Replace the Oil Filter and Oil on Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) How to replace the oil filter and oil on a Volkswagen Passat? Follow this guide to proceed with the replacement: open the car door and pull up the en…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Volkswagen Passat (1996-2005 / 3BG, B5) The first step is to remove the plastic engine cover. Using a ratchet wrench with a joint and extension, carefully unscrew the oil filter and extract…
Removing and Replacing Engine Oil Filter
Removing and Replacing Engine Oil Filter
Volkswagen Passat (1996-2005 / 3BG, B5) This video shows step by step how to remove and replace the engine oil and its filter. First, it is advisable to perform this task with the car semi-…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos