Do it yourself
| ||||
|
Volkswagen T Roc - Video tutorial
Model: Volkswagen T Roc
MK 1
- Years 2017-2024 Let's see how to mount the fog lights on the Volkswagen t-Roc: With the hook attached to the car, we remove the part of the body where the fog lights are mounted, then we unscrew the screws that are on the side of the lighthouse. Now we remove the headlight, first sideways, then outwards. We remove the connector. Now we have the lighthouse in hand: we unscrew the bulb and put the LED one in its place. The Youtuber suggests those of esselleparts. It, where we will find those for the T-roc at 59.90 euros. Let us remember never to touch the new light bulb with bare hands, because doing so will shorten its life. We use disposable gloves. We insert it into the ceiling light and place the cable on the 12 volt connector. We reattach the screws, then put the bezel back on. We do the same for the other side and the job is done.
Posted on 22 April 2023 by ScegliAuto
How to change the colors of the interior lights of the Volkswagen T-Roc - Tiguan
Volkswagen T Roc (2017-2024 / MK 1) Let's find out in this short and simple guide the procedure that will allow us to change the color of the interior lights of the Volkswagen T-Roc, bu
How do you change the color of the interior lights on the Volkswagen T-Roc?
Volkswagen T Roc (2017-2024 / MK 1) The modification of the color of the interior lights on the Volkswagen T-Roc can be done by turning on the instrument panel, inserting the ignition k
How do you change the color of the interior lights on the Volkswagen T-Roc?
Volkswagen T Roc (2017-2024 / MK 1) In order to change the color of the interior lights on the Volkswagen T-Roc, you need to turn on the instrument panel by inserting the ignition key i Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.027
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |