Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on the Volkswagen Golf 8

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Clock

To change the time on this vehicle, refer to the simple instructions below and check the video tutorial as well. First, access the cabin and sit in the driver's seat. Do not start the engine or turn on the ignition. Locate the control at the centre of the instrument panel at the bottom marked with 0.0. Press and hold this button until the time starts to flash, then press it again to change the time. Once set, wait a few seconds for it to save, then proceed to adjust the minutes. Once the new value is set, release the button to save.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time in a Volkswagen Golf?
How to Set the Time in a Volkswagen Golf?
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this tutorial, we will see how to set the time in a Volkswagen Golf, a very simple and quick operation to perform after disconnecting the battery …
How to Set the Time in the Volkswagen Golf?
How to Set the Time in the Volkswagen Golf?
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this tutorial, see how to set the time in the Volkswagen Golf, a very simple and quick operation, to be done after disconnecting the battery or wh…
How to set the correct time on the Volkswagen Golf R 2014
How to set the correct time on the Volkswagen Golf R 2014
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) If you own a Volkswagen Golf R (2014) and want to find out how to set the correct time quickly and safely, all you have to do is follow these steps. …

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos