Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Reversing Camera on a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

See other generations:
This video is currently unavailable

If you want to install a reversing camera on your vehicle, you can find instructions on how to install it in this description, aided by images from the video. First, open the boot and insert the reversing camera into the number plate light holder.

Then, run the power cables inside the boot. Make the electrical connections by taking the voltage from the reversing light.

Run the cables over the headlining of the vehicle until you reach the back of the stereo where you will connect it to the RCA output. This way, whenever you engage reverse, the rear number plate light will turn on, and you will see the reversing camera images on the display.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

How to Install a Reversing Camera on a Volkswagen Polo 6R
How to Install a Reversing Camera on a Volkswagen Polo 6R
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this video tutorial, we will go through the steps to install a reversing camera on a Volkswagen Polo 6R, following the instructions below. First, …
How to Install the Rear Camera on the Volkswagen Polo
How to Install the Rear Camera on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Briefly, we will go through the instructions that will allow you to install the rear camera, useful for parking manoeuvres, on the Volkswagen Polo. F…
How to Install the Rear Camera on the Volkswagen Polo
How to Install the Rear Camera on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this brief and simple guide, you will see the main steps to install the rear camera on the Volkswagen Polo. First, open the boot lid and start rem…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos