Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the SERVICE Warning Light Manually

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

Resetting the SERVICE warning light on the instrument panel is done manually and does not require diagnostic tools. After performing regular maintenance by replacing the engine oil and filters, follow these steps to reset the SERVICE light: 1) Ignition off; 2) Press and hold the button at the bottom right of the instrument panel (00SET button); 3) While holding the 00SET button, turn on the ignition; 4) Release the 00SET button; 5) Press the button at the bottom left of the instrument panel.

Reset completed: the mileage countdown will restart until the next maintenance.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

What does the "Service Now" light indicate in the Volkswagen Golf and how to reset it?
What does the "Service Now" light indicate in the Volkswagen Golf and how to reset it?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In the Volkswagen Golf, the light indicating the message "Service Now" simply signals that it is time to carry out the service at the garage. Once al…
How to Reset the Oil Warning Light on the Volkswagen Golf 8
How to Reset the Oil Warning Light on the Volkswagen Golf 8
Volkswagen Golf (2019-2026 / MK 8, Golf 8, Golf Viii) In this new guide dedicated to your Volkswagen Golf Mk8 (2019-2023), you will learn how to correctly perform the manual reset of the oil warning ligh…
How to Reset the Oil Light on a Volkswagen Golf 7
How to Reset the Oil Light on a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today, learn how to reset the oil light on a Volkswagen Golf 7. First, turn on the ignition and press the button with the 0.0 symbol located below th…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos