Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting the Lower Bumper Trim

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Front bumper

See other generations:
Video tutorial

The front bumper has a lower trim applied through snap-fit plastic tabs: to secure it, simply align the tabs of the trim with the respective slots under the bumper and press until they click into place (if necessary, a rubber mallet can also be used).

This lower trim is the most susceptible to damage: it can easily get scratched when hitting kerbs, edges of pavements, or parking bollards; this solution allows it to be restored or replaced without having to intervene on the entire bumper.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Removing the Front Bumper on Golf 4
Removing the Front Bumper on Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Replacing the front bumper on the Golf 4? Not sure how to do it? Unscrew the fastening bolts located at the top of the bumper (after removing the fro…
Removing Rear Bumper on Volkswagen Golf 2
Removing Rear Bumper on Volkswagen Golf 2
Volkswagen Golf (1983-1992 / Golf 2, MK 2) Open the boot and unscrew the three 8 mm screws located at the top of the rear bumper. Then move to the lower area, possibly raising the car with a j…
Removing Front Bumper on Golf 5
Removing Front Bumper on Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Lift the bonnet and secure it. Unscrew the fastening screws located at the top of the bumper. Once the screws at the top are removed, unscrew the scr…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos