Do it yourself
| ||||
|
Volkswagen Bora - Video tutorial
Model: Volkswagen Bora
MK 7
- Years 2005-2010 In this video tutorial we can see how to reset the Volkswagen Bora service. The first thing to do is vehicle maintenance such as changing the engine oil and filters. Then get on board the car and put on the handbrake, then insert the key and turn on the instrument panel to check that it is necessary to service, then turn off the ignition. To perform the service reset we must use the two buttons located under the speedometer. Press the button on the right and at the same time turn on the ignition, then press the button on the left and the following message appears on the display: "Service-----". Press the button on the right and the message: "SERVICE INSP" appears; press the button on the left, then turn off the ignition and then turn it on again to verify the correct reset of the service.
Posted on 20 May 2023 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |