Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door on a Volkswagen Passat CC?

Model: Volkswagen Passat Cc MK 1 - Years 2008-2018
Part: Car door

In this tutorial, you will see how to remove the front door on a Volkswagen Passat CC, a very simple operation. First, open the door in question, then remove the cover of the large connector and disconnect it by unlocking the corresponding lever. Next, remove the rubber cap from the indicated bolt and undo it using an 8 mm socket. At this point, simply undo the remaining bolts from the two hinges, grasp the door, and detach it from the frame. To fit the replacement, just follow the reverse procedure.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel on a Volkswagen Passat CC?
How to Remove the Front Door Panel on a Volkswagen Passat CC?
Volkswagen Passat Cc (2008-2018 / MK 1) This tutorial shows how to remove the front door panel on a Volkswagen Passat CC. You will need a plastic trim tool, a Torx T30 key, a T20 key, and a…
How to remove the door panel of a VW Passat Cc
How to remove the door panel of a VW Passat Cc
Volkswagen Passat Cc (2008-2018 / MK 1) Removing the front door panel on a 2016 Volkswagen Passat CC is a very simple operation to perform independently. To carry out this operation, we mus…
How to Remove the Front Grille of the Volkswagen Passat CC
How to Remove the Front Grille of the Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) Removing the front grille of your Volkswagen Passat CC may seem like a complex task. In reality, it is very simple, and by following the steps descri…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos