Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Golf
  6. : How to replace the cigarette lighter fuse on a Golf 5

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf V, MK 5, Golf 5 - Years 2003-2008
Part: Cigarette Lighter
Operation: How to replace the cigarette lighter fuse on a Golf 5

Replacing the cigarette lighter fuse of a Volkswagen Golf 5 is a very simple operation. The first thing to do before replacing the fuse is to disconnect the car battery, this to protect yourself from any electric shocks. Then we just have to remove with a spudger, a plastic tool similar to a spatula, the plastic trim placed in the glove compartment located in the dashboard on the right side. Remove the cap from the same and remove the damaged fuses located in the compartment with needle nose pliers. After having carried out this operation, all we have to do is insert the new fuses and close the fuse holder inspection box with the cladding cap. At this point we just have to test the correct functioning of the cigarette lighter.


Posted on 28 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Golf 1997-2003 - Where is the cigarette lighter fuse located, in the Volkswagen Golf 4? Read Answer
    • Golf 2008-2012 - Where is the cigarette lighter fuse located in the Volkswagen Golf 6? Read Answer
    • Golf 2012-2019 - Where is the cigarette lighter fuse located in the Volkswagen Golf? Read Answer
    • Golf 2008-2012 - Why does the cigarette lighter socket on the Volkswagen Golf no longer work? Read Answer
    • Golf 1997-2003 - Where is the Volkswagen Golf 4 cigarette lighter fuse located? Read Answer
    • Golf 2003-2008 - Why is the cigarette lighter of the Volkswagen Golf 5 not working? Read Answer
    • Golf 2012-2019 - What to do if the cigarette lighter on Volkswagen Golf 7 no longer works? Read Answer
    • Golf 2003-2008 - How to replace the cigarette lighter bulb on Volkswagen Golf 5? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos