Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Radio on a Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

In this video tutorial, we will show you the procedure to remove and replace the standard radio with a new multimedia system on a Volkswagen Golf. First, get inside the vehicle and start by removing the plastic cover of the radio, prying it off from the sides (removing it along with the central air vents); then unscrew the mounting screws of the radio to remove it, disconnecting the electrical connectors found on the back, as illustrated in the video.

Now install the new multimedia system compatible with your car!


Updated on 24 July 2026 by ScegliAuto


Related tutorials

Replacing the Radio in a Volkswagen Golf
Replacing the Radio in a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Do you need to replace the radio in a Volkswagen Golf? Here's how to proceed. Turn off the radio, remove the trim using a lever, then use a screwdriv…
How to Reset the Radio in a Volkswagen Golf
How to Reset the Radio in a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To reset a "composition media" radio in a Volkswagen, this video is demonstrated on a Volkswagen Golf, but it can be found in other Volkswagen group …
How to Remove the Standard Radio from a Volkswagen Golf
How to Remove the Standard Radio from a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Follow these simple and quick steps to remove and replace the standard radio from a Volkswagen Golf. First, get inside the vehicle; to extract the ra…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos