Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Multivan
    4. : How to install a voltage meter on the battery of a Volkswagen Multivan.

Volkswagen Multivan - Video tutorial

Model: Volkswagen Multivan MK 2, T5 - Years 2003-2015
Part: Checks and maintenance
Operation: How to install a voltage meter on the battery of a Volkswagen Multivan.

In this video, we see how to install a voltage meter on the auxiliary battery of a Volkswagen Multivan. This is a very important battery because it powers all the electronics, and especially if we use the van as a camper, it is very useful to know how much voltage is in this battery. We can easily find this device on Ali-express for a few euros. We will have to make a small hole in the plastic to insert the device and see it easily. The YouTuber confesses that he doesn't feel like doing all the work to insert it into the dashboard, so he will put it directly on the battery cabinet. We start with the black wire, which we connect to the negative pole; the other end of the wire must be connected to a fork on the device; just know how to use a wire stripper; red on one side and black on the other. The red wire is connected to the positive pole. We test it, and it works. We drill the plastic to accommodate the device in its final position, and the job is done.


Posted on 2 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Multivan 2003-2015 - Where to find the Italian manual of the Volkswagen Multivan? Read Answer

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos