Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Change Light on a Volkswagen Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Checks and maintenance

This video demonstrates how to reset the oil change light on a Volkswagen Golf 6. The procedure is very simple and takes less than a minute. It is recommended to perform this procedure only after changing the oil if the light remains on. To reset the light, insert the key without starting the ignition, then press and hold the button on the right side of the instrument panel. While holding it, start the ignition. When the ignition is on, release the button and press the button on the left side of the panel once. Finally, turn off and then turn on the instrument panel.

Updated on 1 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) In a few simple steps, discover how to reset the service light for the routine maintenance oil change on a Volkswagen Golf. First, get in the vehicle…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) After completing a service, it is necessary to reset the oil service light. This brief video tutorial will explain how to reset the oil warning light…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) When it’s time to change the engine oil on the Volkswagen Golf 7, a warning appears on the instrument panel to remind you to perform the operation. A…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos