Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Starter motor

See other generations:
Video tutorial

This guide provides instructions for removing and replacing the starter motor on a Volkswagen Golf. First, open the engine bonnet and begin by removing the intake hose and the air filter box, unscrewing all the securing screws as shown in the video.

Next, unscrew the securing screws of the starter motor, disconnect the electrical wiring to remove it; then install the new original part, securing it properly and reconnecting, following the video tutorial to the end!


Updated on 3 August 2026 by ScegliAuto


Related tutorials

Replacing the Starter Motor Brushes on the Volkswagen Golf
Replacing the Starter Motor Brushes on the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This guide outlines the procedure for removing and replacing the starter motor brushes on the Volkswagen Golf. First, open the bonnet of your car and…
How to Remove the Starter Motor on a VW Golf 4
How to Remove the Starter Motor on a VW Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Learn how to remove the starter motor from a Volkswagen Golf 4. After removing the engine cover from the car, locate the starter motor. Disconnect th…
How to Replace the Starter Motor Brushes on the Volkswagen Golf
How to Replace the Starter Motor Brushes on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today, in this video tutorial, you will learn the procedure to remove and replace the starter motor brushes on the Volkswagen Golf. First, remove the…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos