Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Suspension Springs

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Suspension system

Replacing the rear suspension spring is relatively straightforward compared to the front suspension, as the spring and damper are not co-axial but separate. Lift the vehicle on a ramp and remove the front wheel. Place a jack under the suspension and remove the shock absorber mounting bolt to slide it out and lower the suspension. Use a lever to lower it further and extract the old spring, then insert the new one. Refit the shock absorber and the wheel.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Front Suspension Springs
Replacement of Front Suspension Springs
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The breakage of the front suspension spring is a rather unusual circumstance; in any case, to replace it, it is first necessary to disassemble the su…
Replacing Rear Shock Absorbers
Replacing Rear Shock Absorbers
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To replace the rear shock absorbers, lift the vehicle, remove the rear wheel, apply a support jack under the suspension, and proceed to remove the up…
How to Replace the Rear Suspension Bush on the Volkswagen Golf?
How to Replace the Rear Suspension Bush on the Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this tutorial, you will see how to replace the rear suspension bush, also known as a "silent block", on the Volkswagen Golf 4. For this operation,…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos