Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag from a Volkswagen Golf 5

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Steering wheel

See other generations:
Video tutorial

If you need to remove the steering wheel for replacing, for example, the airbag ribbon or the steering angle sensor, a common fault on this model, the first thing to remove is certainly the steering wheel airbag. This device is secured with a spring system, so to release it, you must access the springs through the appropriate holes behind the spokes of the steering wheel: you can use a mirror or a smartphone camera to assist.

Once you have accessed the spring, use a flat screwdriver to lever and release it, then repeat the operation on the other spoke. Move the airbag away to finally disconnect the detonator connector: it is advisable to perform this step with the battery disconnected.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Airbag from a Volkswagen Golf
How to Remove the Steering Wheel Airbag from a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Before you can start, sit in the driver's seat of your Volkswagen Golf. Begin by releasing the clips that secure the airbag, located on the back of t…
How to Remove the Steering Wheel and Airbag from the Volkswagen Golf
How to Remove the Steering Wheel and Airbag from the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This guide provides instructions for removing the steering wheel and its airbag from the Volkswagen Golf, as well as the Jetta. First, get inside the…
How to Remove the Airbag from a Golf 4
How to Remove the Airbag from a Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) How to remove the airbag from a Volkswagen Golf? Let's look at removing the steering wheel. Disconnect the battery terminals located in the engine co…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos