Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulbs on a Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

As shown in this tutorial, replacing the front headlamp bulbs on a Volkswagen Polo 5 is a very simple and quick operation. First, ensure the key is not in the ignition for safety.

Then, open the bonnet and position yourself in front of the headlamp you will be working on. Next, remove the two fixing bolts located on the upper edge, disconnect the power connector, and separate the headlamp from the bodywork. At this point, you can remove the rear cover, replace the faulty bulb, and reassemble everything by following the reverse procedure.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs on a VW Polo
How to Replace the Headlight Bulbs on a VW Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Learn how to replace the headlight bulbs on a Volkswagen Polo. Open the front bonnet by pulling the lever located at the bottom right of the dashboar…
How to Replace the Headlight Bulbs on a Volkswagen Polo
How to Replace the Headlight Bulbs on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Learn how to replace the headlight bulbs on a Volkswagen Polo. Open the front bonnet by pulling the lever located at the bottom right of the dashboar…
Replacement of the front headlight of the Volkswagen Polo
Replacement of the front headlight of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In these short and simple instructions, we will see the process of disassembling and replacing the front headlight of the Volkswagen Polo. First, ope…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos