Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Fitting of the Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Interior dome light bulb

See other generations:
Video tutorial

In this brief guide, follow the steps to remove and replace the interior light fitting and bulbs of the Volkswagen Golf. First, get inside the vehicle and start prying off the plastic cover located next to the light fitting; then use a T20 Torx screwdriver to unscrew the screws of the light fitting, disconnecting the electrical connector found at the back to remove it, as shown in the video.

At this point, remove the small bulb bulbs or directly replace the entire light fitting, applying the reverse procedure for reassembly!


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Remove the Interior Light Fitting of the Volkswagen Golf
How to Remove the Interior Light Fitting of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Here are the main steps on how to remove and replace the interior light fitting and its bulbs of the Volkswagen Golf. First, get inside the vehicle a…
How to Replace the Fog Light Bulb on a Volkswagen Golf
How to Replace the Fog Light Bulb on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) This guide outlines the steps to remove and replace the fog light bulb on a Volkswagen Golf. First, open the boot and start by removing the right sid…
How to replace the interior light bulbs of the Volkswagen Golf?
How to replace the interior light bulbs of the Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the interior light bulbs of the Volkswagen Golf, use a tool like a screwdriver to pry open the corresponding light fixture: this will allo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos