Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the windshield washer reservoir of the Volkswagen Passat CC.

Model: Volkswagen Passat Cc MK 1 - Years 2008-2018

Let's discover the instructions that will allow us to disassemble and replace the windshield washer fluid reservoir of the Volkswagen Passat CC. First, let's open the car's engine hood and start by removing the front bumper, unscrewing all the fastening screws. Then, we unscrew the screws of the front headlight, disconnect the electrical connector to remove it, as shown in the video. Now we will have access to the windshield washer fluid reservoir; we disconnect the fluid tube from the washer pump, unscrew the screws of the reservoir to replace it with the new one. All that's left is to reassemble everything!


Posted on 7 August 2023 by ScegliAuto



How to reset the service in the Volkswagen Passat CC?
Volkswagen Passat Cc (2008-2018 / MK 1) Resetting the service in the Volkswagen Passat CC, as we can see in this tutorial, is an extremely simple and fast operation. Before doing this, make
Where are the fuses located in the Volkswagen Passat CC?
Volkswagen Passat Cc (2008-2018 / MK 1) The fuses of the Volkswagen Passat CC are contained inside the appropriate fuse boxes that are inserted in the vehicle: these can be found inside the
Replacement of the timing belt of the Volkswagen Passat CC 2.0 TDI.
Volkswagen Passat Cc (2008-2018 / MK 1) Today's instructions will show us how to disassemble and replace the timing belt of the Volkswagen Passat CC 2.0 TDI. First, we open the car's engine

Other guides that may interest you

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!


by ScegliAuto

More videos