Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Brake Pads on the Volkswagen Passat B6

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Checks and maintenance

Let’s see how to replace the front brake pads on the Volkswagen Passat. First, remove the wheel nut cover; if you have locking wheel bolts, use the appropriate adapter. Then, remove the wheel. Next, you need to remove the spring from the caliper, which can be done with a standard flathead screwdriver. Inside the caliper, there are two plastic caps that need to be removed, then take out the two caliper mounting screws using a 7 mm hex key. Once the caliper is free from the screws, use the screwdriver to push back the piston and fully release the caliper. On the driver's side pads, there is a "brake wear" contact. Now you can remove the worn pads. Fully retract the piston, then insert the new pads. Refit the calipers and reverse all operations until the wheel is remounted. You can repeat the process on the other side.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) Are the rear brake pads worn? Here’s how to replace them inside the brake caliper. Lift the car on a jack, then remove the wheel (using a socket wren…
Volkswagen Passat (2010-2014 / B7) Lift the car on a column jack to the desired height, then remove the wheel (using a telescopic spanner or air drill) along with the respective bolts.…
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) Today, you will see the step-by-step instructions to remove and replace the front brake pads on the Volkswagen Passat. First, lift the vehicle and re…

Other guides you may be interested in

    Frequently Asked Questions

    • Passat 2005-2010 - How to unlock the Volkswagen Passat's lock? Read answer
    • Passat 2005-2010 - Why doesn't the Volkswagen Passat start up? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos