Do it yourself
Frequently asked questions about cars and motorcycles

Replace Rear Brake Pads on Passat

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake pads

See other generations:
Video tutorial

Are the rear brake pads worn? Here’s how to replace them inside the brake caliper. Lift the car on a jack, then remove the wheel (using a socket wrench or air drill) along with the respective bolts.

Unscrew the caliper locking bolt and remove the caliper from the wheel hub. Detach the pads from the caliper after removing it from above the brake disc. Fit the new pads inside the brake caliper.

Reattach the brake caliper to the brake disc, tighten all bolts, and refit the wheel. Test the brakes after installation.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2010-2014 / B7) Lift the car on a column jack to the desired height, then remove the wheel (using a telescopic spanner or air drill) along with the respective bolts.…
Volkswagen Passat (1996-2005 / 3BG, B5) Once the vehicle is lifted and secured on appropriate axle stands, remove the rear wheels, detach the brake caliper from its support, remove the worn…
Volkswagen Passat (2005-2010 / B6, 3C) In this guide, we will see the instructions that will allow us to disassemble and replace the rear seats of the Volkswagen Passat. First, we open the…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos