Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Change Light on the 2014 Passat

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Warning light – error code

This video demonstrates the procedure to reset the oil change light on the 2014 Volkswagen Passat. The procedure is very simple and quick. First, activate the hazard lights, then press and hold the 0.0/set button while starting the instrument cluster. Once the instrument cluster is on, within 20 seconds, release the 0.0/set button and press the button located on the left side of the dashboard. At this point, the procedure will be complete, and you can safely restart the instrument cluster. It is advisable to perform this procedure only after changing the engine oil if the light remains on.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Passat (2010-2014 / B7) This useful video tutorial shows the step-by-step procedure to reset the engine oil change light on a Volkswagen Passat, model B7, produced from 2010…
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) Today, you will see how to reset the service light and engine oil change light on a Volkswagen Passat model B8. To reset the light, press the button …
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) Today, we will explain how to reset the oil warning light on a 2015 Volkswagen Passat. To reset the light, press the button on the instrument panel f…

Other guides you may be interested in

    Frequently Asked Questions

    • Passat 2005-2010 - What does the flashing glow plug warning light on the Volkswagen Passat indicate? Read answer
    • Passat 2005-2010 - What is the car radio code of a Volkswagen Passat? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos