Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

This guide shows you how to remove and replace the gear knob on the Volkswagen Golf by following these simple steps. First, get into the vehicle and start by detaching and removing the gear gaiter found at the base of the lever; then disconnect the metal clip located between the gaiter and the knob to remove the latter from the gear lever, as shown in the video.

At this point, install the new gear knob; then secure the gaiter onto the knob using the appropriate clip, following the video tutorial until the end!


Updated on 16 August 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this tutorial, learn how to remove and replace the gear knob and gaiter of the Volkswagen Golf. First, get inside the vehicle and start by removin…
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Good morning, to remove the gear knob from your Volkswagen Golf, take a seat inside the car. Carefully observe the gear knob, located on the gear lev…
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In today's video tutorial, you will learn how to remove the DSG automatic gear knob on the Volkswagen Golf by following the instructions below. First…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos