Do it yourself
| ||||
|
Volkswagen Polo - Video tutorial
Model: Volkswagen Polo
Polo 4, MK 4, Polo IV, 9N, MK IV
- Years 2001-2009 Today's guide will show us the steps that will allow us to disassemble and replace the front turn signal lights of the Volkswagen Polo. First, we open the car's engine hood and begin by removing the bulb holder of the turn signal light, also removing its bulb. Then, we replace the bulb with a new one of the correct type and with the same attachment, as shown in the video. At this point, we reassemble the bulb correctly, securely attaching it to the bulb holder and then to the headlight assembly. In the same way, we will also replace the other front turn signal light!
Posted on 16 September 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |