Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Volkswagen Polo, start by turning on the ignition and noting the spanner symbol on the total mileage display. To reset it, press and hold the button to the left of the odometer while simultaneously turning on the ignition.

The spanner symbol will appear on the display; keep the button pressed for a few more seconds, then release it. Rotate the button to the right to display the total mileage, and the reset is complete. Now you can turn off the ignition, turn it back on, and check that the spanner symbol is no longer present.


Updated on 18 August 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before you can start, sit in the driver's seat of your Volkswagen Polo and close all the doors. Begin by pressing and holding the "0.0/SET" button lo…
How to Reset the Service Light on a Volkswagen Polo?
How to Reset the Service Light on a Volkswagen Polo?
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) To reset the Service light on a Volkswagen Polo, press and hold the button located on the right side of the instrument panel, just below the speedome…
How to reset the Oil Service light on the Volkswagen Polo?
How to reset the Oil Service light on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To reset the Oil Service light on the Volkswagen Polo, press the button located immediately below the instrument cluster on the left side, then inser…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos