Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Front Headlight for Replacement

Model: Volkswagen Bora MK 6 - Years 1998-2005
Part: Headlight

Open the bonnet and use a screwdriver to lever in the upper hole of the front grille to detach it, then remove the other clips. Unscrew the seven screws of the lower grille using a Torx key. Force the plastic clips and remove the air intake grilles. In the air intake hole, unscrew the retaining screw and the four side screws inside the two wheel arches. At this point, the bumper is free, so gently pull it away from the front of the vehicle, disconnecting the two side cables. Now the headlight assembly is ready for replacement. Unscrew the upper and lower retaining screws and remove it by disconnecting the electrical connector. Place the bulbs in the holder and reconnect the connector to install the new headlights. Test by turning on the headlights to verify correct operation. Refit the bumper and grille.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing the Front Headlamp Glass
Instructions for Replacing the Front Headlamp Glass
Volkswagen Bora (1998-2005 / MK 6) If the headlamps appear particularly yellowed and cloudy, you can always try to restore them with a special polishing or painting; however, if they a…
How to replace the headlight bulb of the Volkswagen Bora.
How to replace the headlight bulb of the Volkswagen Bora.
Volkswagen Bora (2005-2010 / MK 7) Briefly, we will see the instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the Volkswagen Bora. …
How to Adjust the Headlights of the Volkswagen Bora
Volkswagen Bora (1998-2005 / MK 6) In this brief guide, you will see the steps to adjust the height of the front headlights of the Volkswagen Bora, as well as the Jetta and Golf. First…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos