Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Volkswagen Bora.

Model: Volkswagen Bora MK 7 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

See other generations:
Video tutorial

Briefly, we will see the instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the Volkswagen Bora. First, let's open the vehicle's hood and start by removing the plastic protective cap of the bulbs; then we disconnect the electrical connector of the light and release the metal clip to remove the bulb, as shown in the video.

At this point, we install the new low beam bulb, of the correct type and with the same fitting; we reassemble the bulb and check its operation, finally securing the protective cap.


Posted on 19 December 2025 by ScegliAuto


Related tutorials

How to Adjust the Headlights of the Volkswagen Bora
Volkswagen Bora (1998-2005 / MK 6) In this brief guide, you will see the steps to adjust the height of the front headlights of the Volkswagen Bora, as well as the Jetta and Golf. First…
How to Remove the Front Headlights on a Volkswagen Bora - Jetta
How to Remove the Front Headlights on a Volkswagen Bora - Jetta
Volkswagen Bora (1998-2005 / MK 6) In today's video, we will go through the main steps to remove the front headlights and front bumper on a Volkswagen Bora, as well as on the Jetta of …
How to Replace the Rear Light Bulb on a Volkswagen Bora
How to Replace the Rear Light Bulb on a Volkswagen Bora
Volkswagen Bora (1998-2005 / MK 6) To replace the rear light bulb on a Volkswagen Bora, open the boot to access the interior of the luggage compartment. On the side of the boot corresp…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos