Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Control Illumination Bulb

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Light bulb

See other generations:
This video is currently unavailable

Purchase a new bulb identical to the one being replaced. Using a cloth to avoid damaging the plastic, pull firmly on the adjustment knob and pull it outwards.

Gently grasp the bulb by the base and remove it by simply pulling it out. Take the new bulb from the container and reinstall it in the bulb holder. Refit the knob by simply inserting it onto the pin. For LED bulbs, it is important to install them with the correct polarity.

If the new bulb does not light up, rotate it 180 degrees and reinstall.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

How to Locate the Fuse Boxes and Understand the Schematics in a Volkswagen Golf IV Bora
Volkswagen Bora (1998-2005 / MK 6) This video shows how to locate the fuse boxes in a Volkswagen Golf IV Bora. The first fuse box is found in the passenger compartment, directly behind…
Replacing the LED Bulb in the Interior Light
Replacing the LED Bulb in the Interior Light
Volkswagen Bora (1998-2005 / MK 6) Choose a new replacement bulb identical to the one being replaced. LED bulbs of the tubular type are available on the market and are fully compatible…
How to replace the headlight bulb of the Volkswagen Bora.
How to replace the headlight bulb of the Volkswagen Bora.
Volkswagen Bora (2005-2010 / MK 7) Briefly, we will see the instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the Volkswagen Bora. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos