Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the LED Bulb in the Interior Light

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Interior dome light bulb

See other generations:
Video tutorial

Choose a new replacement bulb identical to the one being replaced. LED bulbs of the tubular type are available on the market and are fully compatible with old filament bulbs; both types are interchangeable without any modifications to the system.

Remove the cover of the interior light to access the bulb holder, remove the faulty bulb, and install the new bulb. For LED bulbs, it is important to install them with the correct polarity.

If the new bulb does not light up, rotate it 180 degrees and reinstall it. Close the interior light with its cover. The same operation can be performed on other interior lights.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Volkswagen Bora (1998-2005 / MK 6) The cabin air filter is located outside the cabin, just under the windscreen, on the passenger side; unscrew the fixing screws of the plastic cover, …
Replacing the Rear Light Bulbs (Stop Lights)
Replacing the Rear Light Bulbs (Stop Lights)
Volkswagen Bora (1998-2005 / MK 6) If you want to replace the rear light bulbs (stop lights) of your Volkswagen Bora, here’s a very simple tutorial that will show you how to do it. Fir…
Installation of Fuel Filler Flap Release
Installation of Fuel Filler Flap Release
Volkswagen Bora (1998-2005 / MK 6) Since the fuel filler flap is opened via a button inside the cabin, it may be useful to install a system that allows it to be opened simply by bringi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos