Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volkswagen Polo 6R

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

If you have just serviced your Volkswagen Polo 6R (2009-2017) but the warning light remains illuminated, proceed with the following manual reset. First, enter the cabin, take your seat, and ensure the ignition is off. Now, press and hold the "0.0/Set" button located below the mini display and turn on the ignition.

When prompted to reset the light, release the button and press the button to its left once.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before you can start, sit in the driver's seat of your Volkswagen Polo and close all the doors. Begin by pressing and holding the "0.0/SET" button lo…
How to Reset the Service Light on a Volkswagen Polo?
How to Reset the Service Light on a Volkswagen Polo?
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) To reset the Service light on a Volkswagen Polo, press and hold the button located on the right side of the instrument panel, just below the speedome…
How to reset the Oil Service light on the Volkswagen Polo?
How to reset the Oil Service light on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To reset the Oil Service light on the Volkswagen Polo, press the button located immediately below the instrument cluster on the left side, then inser…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos