Do it yourself
Frequently asked questions about cars and motorcycles

How to Install H7 LED High Beam Bulbs in a Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years 2007-2016
Part: Headlight bulb

In this video tutorial, you can see how to install H7 LED high beam bulbs in a Volkswagen Tiguan by following a few simple steps: first, lift the bonnet and secure it with the prop rod. No adapter is needed for the high beams, while an adapter is required for the dipped beams. Remove the bulb's protective cap, and once the rubber protection is removed, proceed to take out the bulb; after removing the bulb (without an adapter), disconnect the connector. Now connect the electrical connector to the new LED bulb for the high beams. Start the engine to check if the LED bulb works correctly (if it doesn't work, reverse the polarity); once you have tested that it works, install the LED bulb into its designated housing. Repeat the same procedure on the other side.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Tiguan (2007-2016 / 5N, MK 1) As seen in this tutorial, replacing the front headlight bulbs with LED bulbs in a Volkswagen Tiguan is a very simple and quick operation. First, ensu…
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) In today's video, learn how to remove and replace the fog lights on the Volkswagen Tiguan. Specifically, new LED units will be installed. First, purc…
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) This guide outlines the steps to remove and replace the dipped beam bulbs in the front headlights of the Volkswagen Tiguan. First, open the bonnet of…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos