Do it yourself
| ||||
|
Volkswagen Passat Cc - Video tutorial
Model: Volkswagen Passat Cc
MK 1
- Years 2008-2018 In order to program the key of the Volkswagen Passat CC, you need to insert the blank key into the ignition switch and turn it to position 1 to turn on the instrument panel. This will allow you to connect the diagnostic tool to the car's OBD port, located under the steering column. Once the scanner is connected, you can select the car model and its corresponding version, and then follow the other instructions to program it. After the programming is complete, you can disconnect the scanner and check if the key is functioning properly.
Posted on 29 October 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the service in the Opel Antara?As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.031
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |