Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace the front headlight of a Volkswagen Polo 9n version.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Headlight
Operation: How to replace the front headlight of a Volkswagen Polo 9n version.

In this video, we see how to change the front headlight of a Volkswagen Polo 9n version. First, we need to unscrew the seven screws that the video shows us on the front of the car, which we will have to remove along with the front grille. In the front wheel arch that we are interested in, we will have to remove four screws because that will also need to be removed, along with the plastic that is located under the front bumper. At this point, it will be easy to remove the third screw on the top of the headlight. Using a small key, we need to enter the hole that has opened underneath to extract the second screw of the headlight. Now we can remove it with caution and disconnect the cable. The YouTuber shows us where we removed the screws; this is where we will put them back to reinstall the new headlight. Then we need to put the wheel arch, the paste located under the front bumper, and the entire front grille back in place. Now the job is finished.


Posted on 10 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the front headlight of the Volkswagen Polo 8? Read Answer
    • Polo 2001-2009 - How much does the right headlight of a Volkswagen Polo cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos