Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on a Volkswagen Up?

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Headlight bulb

In this tutorial, you will learn how to replace the headlight bulbs on a Volkswagen Up, a very simple and quick task. First, ensure that the key is not in the ignition for safety. Then, open the bonnet and remove the large cap located at the back of the headlamp. Next, disconnect the power connector, remove the rubber cover, and unclip the metal retaining clip. At this point, you can extract the old bulb, insert the replacement, and reassemble everything by following the reverse procedure.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Headlight Bulb of a Volkswagen Up
How to Change the Headlight Bulb of a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) This video tutorial shows the procedure to replace the bulbs of the front, rear, and interior lights of a Volkswagen Up. To replace the front headlig…
How to adjust the height of the headlights on the Volkswagen Up.
How to adjust the height of the headlights on the Volkswagen Up.
Volkswagen Up (2011-2024 / MK 1) Today's guide will show us how to adjust the height of the headlights on the Volkswagen Up in simple steps. First, let's position ourselves in front …
Where are the fuses of the Volkswagen Up located?
Where are the fuses of the Volkswagen Up located?
Volkswagen Up (2011-2024 / MK 1) The fuse boxes present on the Volkswagen Up are designed to contain the fuses that regulate the operation of the devices installed on the vehicle: in…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos