Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front window regulator mechanism in the Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side window

See other generations:
Video tutorial

In this tutorial, you will see how to replace the front window regulator mechanism in the Volkswagen Jetta, a straightforward operation that requires good manual skills. First, open the relevant door, then unclip both the indicated trim and the control console, unscrew all the fixing screws, and unclip the inner panel.

Next, disconnect the lock cable, remove the additional cover, and dismantle the motor. At this point, simply separate the glass from the mechanism, remove the mechanism by unscrewing the relevant bolts, and follow the reverse procedure to fit the replacement.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Reset the Window Mechanism on the Volkswagen Jetta
How to Reset the Window Mechanism on the Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) In this short and simple guide, you will find instructions on how to reset and restore the window mechanism on the Volkswagen Jetta. First, get in th…
How to Replace the Window Switch Buttons on the Volkswagen Jetta - Golf
How to Replace the Window Switch Buttons on the Volkswagen Jetta - Golf
Volkswagen Jetta (2005-2010 / MK 5, A5) The steps outlined in this guide will show you how to remove and replace the window switch panel of the Volkswagen Jetta, as well as the Golf. First,…
How to Replace the Fuel Door Actuator in the Volkswagen Jetta?
How to Replace the Fuel Door Actuator in the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this tutorial, you will see how to replace the fuel door actuator in the Volkswagen Jetta, a very simple and quick operation. First, open the fuel…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos