Do it yourself
| ||||
|
Volkswagen Lupo - Video tutorial
Model: Volkswagen Lupo
MK 1
- Years 1998-2005 If you are curious to find out where the OBD port of your Volkswagen Lupo is located, then you are in the right place. Below, in fact, we will discover together the various steps to follow to be able to locate it in a few seconds and without any difficulty. First of all, go inside the cabin and position yourself on the front driver's seat. At this point, shift your attention to the central part of the dashboard and locate the small plastic cover. Remove it with your own hands and you will finally have free access to the OBD port you were looking for.
Posted on 22 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.031
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |