Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. New Beetle
    4. : How to disassemble the fog lights of the Volkswagen New Beetle.

Volkswagen New Beetle - Video tutorial

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Fog lights
Operation: How to disassemble the fog lights of the Volkswagen New Beetle.

Briefly, we will see the instructions that will allow us to disassemble and replace the front fog light of the Volkswagen New Beetle. First, lift the car and start by removing the lower bumper cover, as well as the one where the grille and fog lights are attached. To do this, release the various plastic clips and disconnect the fog light electrical connectors, as shown in the video. At this point, remove and replace the fog lights or bulbs with the new ones of the correct type, applying the reverse process for reassembly!


Posted on 15 January 2024 by ScegliAuto



Replacement fog lights on Vw New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) How to remove the fog light bulb of a Vw New Beetle? Let's see how to remove the bulb from inside the front fog light. We detach the plastic covering
How to replace the fog light bulb of the Volkswagen New Beetle.
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Briefly, we will see the main instructions useful for disassembling and replacing the front fog light bulb of the Volkswagen New Beetle. First, it wi
Where are the fuses located in the Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / MK 2, 9C) The fuses of the Volkswagen New Beetle are contained within the appropriate fuse box installed on the car: in this type of vehicle, there is only one

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos