Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

In this video, you will see how to check the engine code on a Volkswagen Golf VII: first, observe how the vehicle communicates it through the instrumentation. You will need to press and hold the "0.0" button located in the centre of the dashboard after turning the key in the ignition, and an alphanumeric code of four digits will appear on the right side of the display: that is the engine code.

You can also verify it in the vehicle registration document, in section two, under "P.5" you will find the same code. If you want to cross-check, physically go to the engine block, at the bottom near the base, and you will find the same code displayed.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video, you will see how to code the sound of opening and closing the doors with a beep. This operation can be done independently from the onb…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video, we will see how to change the high-pressure fuel sensor on a Volkswagen Golf VII: we can find the part, for example, on auto-doc. It h…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video, see how to check the state of charge (SoC) of the battery in a Volkswagen Golf MK7 using the instrument panel display. This function a…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - What does the Volkswagen Golf error code P171900 indicate? Read answer
    • Golf 2008-2012 - What does the p171900 fault code indicate, in the Volkswagen Golf? Read answer
    • Golf 2019-2026 - How to reset the Volkswagen Golf Infotainment system? Read answer
    • Golf 2008-2012 - What does the fault code 00883 mean in the Volkswagen Golf? Read answer
    • Golf 2012-2019 - What does the Volkswagen Golf error P171900 mean? Read answer
    • Golf 2019-2026 - How to reset the Infotainment system in the Volkswagen Golf 8? Read answer
    • Golf 1997-2003 - What does the DSG error message on the Volkswagen Golf Mk4 mean? Read answer
    • Golf 2012-2019 - What to do when the brake pad warning light comes on on my Golf 7? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos