Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Non-Original Xenon Headlamp Bulb

Model: Volkswagen Touareg 7L, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Xenon headlight kit

See other generations:
Video tutorial

Open the bonnet and remove the headlamp assembly completely. Place it on a support and open the various covers to access the bulb holders.

Remove the bulb holder and extract the old bulb. Insert the new xenon bulb, taking care not to touch the glass bulb with your hands.

Refit the bulb holder in its housing and secure it with the spring. Reassemble the headlamp unit in the vehicle.

Repeat the same operation with the other unit. Check the operation by turning on the headlights.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacing Headlight Bulb on VW Touareg
Volkswagen Touareg (2010-2018 / MK 2, 7P) Lift the bonnet and locate the cover cap for the headlight. Disconnect the cover cap from behind the headlight, remove the bulb holder, and extract t…
Replacement of the Front Headlamp Bulb
Replacement of the Front Headlamp Bulb
Volkswagen Touareg (2002-2010 / 7L, MK 1) Taking your car to an auto electrician to replace a headlamp bulb can be quite costly. You can proceed with a DIY approach. This guide shows how to c…
How to Replace the Headlight Bulb on the Volkswagen Touareg?
How to Replace the Headlight Bulb on the Volkswagen Touareg?
Volkswagen Touareg (2010-2018 / MK 2, 7P) To replace the headlight bulb on the Volkswagen Touareg, open the bonnet and loosen the screws securing the headlight from the top. Once these are re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos