Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Volkswagen Golf 7?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt on a Volkswagen Golf 7, open the bonnet to access the components inside the engine bay: on the left side of the engine block, you will find a cover that must be removed by loosening its fixing screws. Once the screws are loosened, you can locate the timing belt underneath: this must be removed from its housing by loosening the central nut of the tensioner pulley to reduce its tension.

This way, the old belt can be removed and replaced with a new one.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Volkswagen Golf?
How to Replace the Timing Belt on a Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Hello! Today, replace the timing belt on your Volkswagen Golf. First, position the car on a flat surface and ensure the engine is cold. Carefully rem…
Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide, we will discover the procedure for removing and replacing the timing belt on a Volkswagen Golf 1.4 TSI. First, open the engine bonnet …
Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below we will discover information on how to disassemble and replace the timing belt of the Volkswagen Golf 1.6 TDI; the manufacturer states that, on…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos