Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Sharan
    4. : How do you remove the sunroof of the Volkswagen Sharan?

Volkswagen Sharan - Video tutorial

Model: Volkswagen Sharan MK 1, 7M - Years 1995-2010
Part: Checks and maintenance
Operation: How do you remove the sunroof of the Volkswagen Sharan?

In order to remove the headliner of the Volkswagen Sharan, you must first completely detach the sun visors by loosening the screws that secure them to their housing. Once the sun visors have been removed, you can proceed by unscrewing the screws that secure the handles and the central courtesy light fixture. Then, you can detach the interior rearview mirror and the door pillar trim pieces. This will allow you to lever the headliner away from its housing, and then extract it through the rear hatch. You can then install the new headliner and reassemble all the removed parts.


Posted on 25 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Sharan 2010-2023 - How to unlock the trunk of the Volkswagen Sharan? Read Answer
    • Sharan 1995-2010 - Where is the tire repair kit located in the Volkswagen Sharan? Read Answer
    • Sharan 2010-2023 - Where is the jack of the Volkswagen Sharan located? Read Answer
    • Sharan 2010-2023 - How to remove the AdBlue warning light in the Volkswagen Sharan? Read Answer
    • Sharan 2010-2023 - What problems have been encountered with the Volkswagen Sharan AdBlue system? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos