Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate or deactivate the lane keeping assist of the Volkswagen T-Cross

Model: Volkswagen T Cross MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

Video tutorial

Today's video will show you how to activate or deactivate the automatic lane keeping assist system of the Volkswagen T-Cross, as well as the T-Roc. First, get in the vehicle and start the engine; then go to the settings menu on the central display and select the driver assistance option, as shown in the video.

At this point, set up your lane assist; you can select the levels of lane keeping assistance and even deactivate it completely, following the video tutorial to the end!


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Activate Light Assist on the Volkswagen T-Cross
How to Activate Light Assist on the Volkswagen T-Cross
Volkswagen T Cross (2019-2026 / MK 1) .. high beam activation, on the Volkswagen T-Cross. The light assist function is an option and may not be available on all trims; first, get inside.. …
How to Connect Your Phone to a Volkswagen T-Cross
How to Connect Your Phone to a Volkswagen T-Cross
Volkswagen T Cross (2019-2026 / MK 1) .. To connect your phone to a Volkswagen T-Cross, start the vehicle and the multimedia system. On the display, access the "Phone" or "Bluetooth".. …
How to Activate the Fog Lights on the Volkswagen T-Cross?
How to Activate the Fog Lights on the Volkswagen T-Cross?
Volkswagen T Cross (2019-2026 / MK 1) .. To activate the fog lights on the Volkswagen T-Cross, use the knob located to the left of the steering column: here you can turn the knob counterclockwise.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos