Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery for the Volkswagen Touareg

Model: Volkswagen Touareg MK 2, 7P - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

This guide will show you the procedure for removing and replacing the battery of the key fob for the Volkswagen Touareg. First, take your key fob and start by removing the plastic cover found on the back, prying at the sides; then remove the battery located inside, as shown in the video.

Next, install the new battery, the correct type (in this case, a CR 2032 3V); insert it the right way round and refit the key fob cover, finally testing the operation of the controls!


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on a Volkswagen Touareg
How to Replace the Key Fob Battery on a Volkswagen Touareg
Volkswagen Touareg (2010-2018 / MK 2, 7P) These brief instructions will show you how to disassemble and replace the battery in the key fob for a Volkswagen Touareg. First, take your key fob a…
How to Replace the Key Fob Battery for the Volkswagen Touareg?
How to Replace the Key Fob Battery for the Volkswagen Touareg?
Volkswagen Touareg (2010-2018 / MK 2, 7P) This guide provides instructions on how to disassemble and replace the battery in the key fob for the Volkswagen Touareg in simple steps. First, take…
How to Replace the Key Fob Battery for the Volkswagen Touareg
How to Replace the Key Fob Battery for the Volkswagen Touareg
Volkswagen Touareg (2010-2018 / MK 2, 7P) Today, follow these simple steps to disassemble and replace the battery in the key fob for the Volkswagen Touareg. First, take the key fob in hand an…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos