Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Logo from the VW Transporter

Model: Volkswagen Transporter T5, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Manufacturer emblem

See other generations:
Video tutorial

To remove the manufacturer’s badge from a Volkswagen Transporter T5, first remove the protective grille from the inner bumper. To do this, remove the four screws that secure it. Once removed, you can take off the badge.

Use a flathead screwdriver to push the internal clips outward. Once done, the badge will be completely removed.

To insert it back, position the grille on the vehicle and push the badge into the appropriate holes.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of the VW Transporter
How to Remove the Door Panel of the VW Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) Removing the door panel of the Volkswagen Transporter model T5 is a very simple operation that can be done independently. To remove the panel, first …
How to remove the front bumper of the VW Transporter
How to remove the front bumper of the VW Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) Today we will explain how to remove the front bumper of the Volkswagen Transporter T5 model. We start by removing the bumper by removing the wheel an…
How to remove the security bolt of the spare wheel of the Volkswagen Transporter
How to remove the security bolt of the spare wheel of the Volkswagen Transporter
Volkswagen Transporter (2014-2025 / T6, MK 6) In this short guide, we will see the steps that will allow us to remove the spare wheel from the floor of the Volkswagen Transporter. First of all, l…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos