Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the VW Transporter

Model: Volkswagen Transporter T5, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

Removing the door panel of the Volkswagen Transporter model T5 is a very simple operation that can be done independently. To remove the panel, first unclip the handle to access the first two screws.

Once you have unscrewed the first two screws, remove the covers of the side and bottom screws. Finally, lift the panel and remove it. Then disconnect the connector of the handle and that of the window switch.

To remove the panels of the other doors, you will need to perform the same operation. The same procedure applies for removing the panel of the VW Transporter T6.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to disassemble the rear door panel of the Volkswagen Transporter
How to disassemble the rear door panel of the Volkswagen Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) Today we will see the instructions that will allow us to disassemble and remove the rear tailgate panel of the Volkswagen Transporter. First, open th…
How to Remove the Front Door Panel from the Volkswagen Transporter
How to Remove the Front Door Panel from the Volkswagen Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) In this guide, we will discover the procedure to remove and replace the front door panel of the Volkswagen Transporter. First, open the front door an…
How to Remove the Door Panel of a Volkswagen Transporter?
How to Remove the Door Panel of a Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / T6, MK 6) To remove the door panel of a Volkswagen Transporter, start by removing the visible fixing screws around the perimeter of the panel. Once removed, us…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos