Do it yourself
| ||||
|
Volkswagen Tiguan - Video tutorial
Model: Volkswagen Tiguan
5N, MK 1
- Years 2007-2016 In this video we see how to change the rear turn signal bulb of the Volkswagen Tiguan: we start by opening the rear hatch and removing the protective plate that covers the two screws for access to the tail light; after unscrewing them, we open the door on the side of the trunk (in the case of the left turn signal) and find a bolt to unscrew to free the tail light. At this point, the tail light is free and we can remove the electrical connectors, remove the rubber protection and then access the bulb that we will be able to remove and change without difficulty.
Posted on 12 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |