Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Sun Visor on a Volkswagen Jetta?

Model: Volkswagen Jetta A2, MK 2 - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to remove the sun visor on a Volkswagen Jetta, a very simple and quick operation. First, go to the seat on the side where you will be working, then fully lower the visor, grasp the inner edge, and pull it towards you to detach it from its support.

Next, separate the fixing clip by unscrewing the respective screw with a cross-head screwdriver, unscrew the screw from the opposite base, and separate the visor from the headlining. To fit a replacement, simply follow the reverse procedure.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to Remove the Headlining from a Volkswagen Jetta
How to Remove the Headlining from a Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) In this guide, you will find the main instructions that will allow you to remove and replace the headlining of a Volkswagen Jetta. First, get inside …
How to Remove the Roof Lining on the Volkswagen Golf 5 - Jetta
How to Remove the Roof Lining on the Volkswagen Golf 5 - Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) In this video tutorial, you will see the main instructions for removing the roof lining on the Volkswagen Jetta MK5, as well as on the Golf 5. First,…
How to Remove the Headlining on a Volkswagen Jetta
How to Remove the Headlining on a Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) How to remove the headlining on a Volkswagen Jetta? Follow this video to see how to proceed with the removal: start by removing the side handles of t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos