Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

Inside the Volkswagen Polo, you can reset the Service light by pressing the button located just below the instrument cluster on the central right side, marked 0.0/SET, and turning the key to switch on the instrument cluster. After performing these two actions, wait a few seconds and then release the button, noting that the spanner light will still be on. You will then need to press the other button in the centre of the instrument cluster, and you will see that the Service light will disappear.

At the end of this procedure, you can switch off the ignition.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to Reset the Inspection Light on a Volkswagen Polo
How to Reset the Inspection Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Follow the procedure to reset the oil change service light on your Volkswagen Polo. First, get into the vehicle and press and hold the button located…
How to Reset the "Service" Light on a Volkswagen Polo?
How to Reset the "Service" Light on a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Hello, today discover how to reset the "Service" light on your Volkswagen Polo. Start by sitting in the driver's seat of your vehicle. Next, press an…
How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Start by sitting in the driver's seat of your Volkswagen Polo. Next, press and hold the "0.0/SET" button located below the multifunction display of t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos