Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fuel pump in the Volkswagen Passat?

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Fuel pump

The fuel pump, when it doesn't work, is immediately noticeable, as the car stops after a few meters, if we are driving, and the engine turns off. Unless it is a fuse problem, you will need to proceed with the disassembly of the fuel pump, just as explained in this video. You start by removing the rear seats, then proceed to open the insulation partitions, access the tank and next to it you will find the aforementioned fuel pump. All that remains to do is to disconnect the power cables, unscrew the fixing bolts and remove it from its seat.

Posted on 15 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Fuel Pump on a Volkswagen Passat
How to Change the Fuel Pump on a Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) In this video tutorial, you will learn how to remove and replace the fuel pump on a Volkswagen Passat by following these simple steps. First, open th…
How to Replace the Fuel Pump on a Volkswagen Passat
How to Replace the Fuel Pump on a Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) To replace the fuel pump on a Volkswagen Passat, open the rear hatch and lift the carpet at the base of the boot. Underneath, you will find a circula…
How to Remove the Fuel Pump Assembly from a Volkswagen Passat
How to Remove the Fuel Pump Assembly from a Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) Follow this guide to remove the fuel pump assembly from a Volkswagen Passat. First, disconnect the battery cables, then remove the rear seat from the…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos