Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Forced opening of the Volkswagen ID 4 charging port

Model: Volkswagen Id 4 MK 1 - Years 2020-2026
Part: Checks and maintenance

The Volkswagen ID 4 is an electric vehicle equipped with an electric motor powered by batteries that need to be recharged from the electrical grid, through an external socket covered by a small door. The mechanism for opening and closing this door is exposed to the elements and may be subject to jams that can make recharging operations difficult. If this inconvenience occurs, let's equip ourselves with a very thin plastic lever, an old credit card can also work, insert it between the edge of the door and the side panel, on the side near the headlight, slide upwards and lever outwards to unlock the door.

Posted on 16 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Blocked Charging Port on a Volkswagen ID.4?
Volkswagen Id 4 (2020-2026 / MK 1) In your Volkswagen ID.4, the charging port door may become stuck, possibly due to a fault with the control button or the lock actuator. In this case,…
Where is the Fuse Box of the Volkswagen ID 4?
Volkswagen Id 4 (2020-2026 / MK 1) In this mini guide dedicated to your Volkswagen ID 4 (2020-2023), discover where the fuse box containing all the vehicle's fuses is located. First, p…
How to Install the Front Dash Cam on Volkswagen ID 4
How to Install the Front Dash Cam on Volkswagen ID 4
Volkswagen Id 4 (2020-2026 / MK 1) Below are the main instructions to install the front dash cam on a Volkswagen ID 4. First, get into the vehicle with a compatible camera model; then …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos